Andrew Kohlsmith
- Email:
- Registered on: 03/10/2011
- Last connection: 01/14/2023
Projects
- ESP8266 Breakout (Manager, 01/16/2015)
- iPhone 4 HSMC Interface (Manager, 03/01/2014)
- Mixdown (Manager, 04/12/2012)
- Model Rocket Logger/Locator (Manager, 01/16/2015)
- PICJUG (Manager, 09/16/2013)
Activity
Reported issues: 652
03/19/2015
- 09:24 PM iPod Nano 6 Display Breakout Bug #471: 3.3VEN signal is active low... make it active high
- Fixed for real in commit:a166d76.
- 08:47 PM iPod Nano 6 Display Breakout Bug #601 (Feedback): TLV61220 footprint wrong
- 08:46 PM iPod Nano 6 Display Breakout Bug #601: TLV61220 footprint wrong
- Footprint fixed in commit:122c7eb.
- 08:46 PM iPod Nano 6 Display Breakout Task #604 (Feedback): Remove the data/clk pulldowns
- Removed in commit:122c7eb.
- 08:23 PM iPod Nano 6 Display Breakout Task #604 (Feedback): Remove the data/clk pulldowns
- I need finer control over the DP/DM and CLKP/CLKM lines in order to properly transition between the LP and HS modes. ...
- 08:21 PM iPod Nano 6 Display Breakout Task #603 (New): use an LED driver for the backlight
- Need to bring the LED- line out so it can connect to the feedback path. See #602.
- 08:20 PM iPod Nano 6 Display Breakout Bug #470 (Rejected): determine TBD values for backlight boost converter
- Invalid, see #602
- 08:19 PM iPod Nano 6 Display Breakout Bug #601: TLV61220 footprint wrong
- Part doesn't work for us anyway, see #602
- 08:19 PM iPod Nano 6 Display Breakout Bug #602 (New): boost converter won't boost high enough
- The TLV61220 has a maximum output voltage of 5V. We need about 16V.
There aren't many SOT23 boost regulators which...
03/18/2015
- 06:28 PM iPod Nano 6 Display Breakout Bug #601 (Feedback): TLV61220 footprint wrong
- The SOT23-6 footprint I created is mirrored top-to-bottom (i.e. pin 1 is pin 3, pin 4 is pin 6).
!picture963-1.png...
Also available in: Atom